The following table contains chemical compositions of drawn wire, rod, bar and strip aluminium alloys

Alloy	Si		Fe	Cu		Mn		Mg		Cr		Zn		Ti	Other7		Al
	min	max	Max	min	max	min	max	min	max	min	max	min	max	max	min	max	min
12001	Si+Fe 1.0 max			-	0.05	-	0.05	-	-	-	-	-	0.10	0.05	0.05	0.15	99.06
2100	-	0.40	0.7	5.0	6.0	-	-	-	-	-	-	-	0.30	-	0.054	0.15	rem
32031	-	0.60	0.7	-	0.05	1.0	0.5	-	-	-*	-	-	0.10	-	0.05	0.15	Rem
5056	-	0.30	0.40	-	0.10	0.05	0.20	4.5	5.6	0.05	0.20	-	0.10	-	0.05	0.15	Rem
5251	-	0.40	0.50	-	0.15	0.10	0.50	1.7	2.4	-	0.15	-	0.15	0.15	0.05	0.15	Rem
6061	0.40	0.80	0.70	0.15	0.40	-	0.15	0.8	1.2	0.04	0.35	-	0.25	0.15	0.05	0.15	Rem
6063	0.20	0.60	0.35	-	0.10	-	0.10	0.45	0.9	-	0.10	-	0.10	0.10	0.05	0.15	Rem
6201A2	0.50	0.70	0.350	-	0.04	-	-	0.6	0.9	-	-	-	-	-	0.05	0.15	Rem
62533	-	-	0.50	-	0.10	-	-	1.0	1.5	0.04	0.35	1.6	2.4	-	0.05	0.15	Rem
6262	0.40	0.80	0.70	0.15	0.40	-	0.15	0.8	1.2	0.04	0.14	-	0.25	0.15	0.055	0.15	Rem
7075	-	0.40	0.50	1.2	2.0	-	0.30	2.1	2.9	0.18	0.28	5.1	6.1	0.20	0.05	0.15	rem

Note:

1. 0,0008% max beryllium for welding electrode and filler wire only

2. Boron 0.06% max

3. Silicon 45 to 65% max of actual magnesium content

4. Lead, bismuth 0.20% min to 0.60% max each

5. Lead, bismuth 0.40% min to 0.70% max each

6. The aluminium content for unalloyed aluminium not made by a refining process is the difference between 100.00% and the sum of all other metallic elements present in amounts of 0.010% or more each, expressed to the second decimal place before determining the sum.

7. Analysis is regularly required only for elements for which specific limits are shown, except for unalloyed aluminium. If however, the presence of other elements is suspected, or indicated in the course of routine analysis, further analysis is required to determine that these elements are not present in excess of the amount specified.